This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Wing information ====== By clicking on already existing wings in your [[https://we-measure.io/user/wings|collection]] you will see detailed information. In the //Info// dialogue, you can change the description and add information that in the //About// field are displayed as n/a. The description can be a color, nickname or whatever you like to enter there. It will be displayed in brakets behind the wing type instead of the default date of certification for this wing. In case that we've found safety notices for a wing, we will display them here. This is not exhaustive and if you are aware of a safety information for a wing that might be missing, please [[https://we-measure.io/contact|contact us]]. In the //Loops// dialogue, you can set the current loop set-up of your wing. If you already entered it before, e.g during a measurement, you can view or change the loop set-up here to fit the current state of your wing. The //Measurement// dialog will show, based on the status of measurements of the selected wing the following actions: * Start (for starting a new measurement) * Result (for finished measurement) * Simulation (for measurements in progress) * Continue (for a started measurement where not all readings might have been entered yet) * A measurement is in progress as long as not all line fields are filled with readings. Before starting a new measurement for a wing, you need to complete or delete it.