====== Re-measure ======

In case you selected, that you would like to re-measure the wing, you can then select, which readings should be re-set. If only single main lines are selected here, for all other main lines and their accompanying suspension points, the readings will be copied from the initial measurement. 

<alert info>This way of re-measuring your wing only makes sense, if you directly do it after the initial measurement. If you fly the wing in between, we highly recommend to do a complete new measurement.</alert>

You then have the possibility to add some comments that would also appear in the final protocol. 

This can - for instance - be used, if you realized damages on your wing, if you would like to protocol changes in trim, like a splice in some lines, other than loops on the main lines etc.

In this step you can also add changes on cascade loops or line insert. 

Additionally, we added a feedback form and are looking forward to hearing about your measurement experience through this. 

In case, you selected the re-measurement option, in the next step you are forwarded to the [[measurement-overview|measurement page]] again to re-measure the selected main lines. 

If you didn't select any changes, your measurement will be finished and you will reach the [[result|result page]]. 

<alert warning>Once again, be aware that trimming your wing has [[https://we-measure.io/dangers|dangers]] and that you are fully aware that everything you change on a wing and the resulting behaviour in flight is of your own responsibility!</alert>